After years of research and development, we finally develop the new-type
steel grinding rod successfully. The newly developed product is characterized by
low wear, unique chemical composition, high hardness of 45HRC to 55HRC, and
strong toughness. Meanwhile, via the quenching and high temperature tempering
treatment, the internal stress is removed. The product has good straightness,
and won't break, bend and come out with two tapering ends. The economic benefit
is much in evidence.
A. The blanking of the steel grindng rod is implemented via the sawing
machine. The dimensional tolerance would adide by the requirements of the order.
After the implementation of blanking, the two ends of the raw material are
polished into the R arc via the polishing machine.
B. The surface of the product for the rod mill cannot have the crack,
overburning and fissure visible to the naked eyes.
C. The nonstraightness of the product is less than 0.2%. The diameter
tolerance ranges from +0mm to -1.5mm. The length tolerance is fro +0mm-25mm. The
fracture should be less than 3%.
If you need grinding steel rod, welcome to consult us.
